EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

Einklappen
X
 
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • Hans Meessen
    Free-Member
    • 27.03.2003
    • 228

    #1

    EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

    Momentan wohl erst auf der Website von Canon Japan verfügbar.

    Alle Änderungen für die R6
    • It is now possible to set [Overheat control: On] when choosing to display an image via the HDMI output while also displaying an image on the camera screen.
    • Temperature detection and shooting time limits when video shooting has been improved. In addition, the total shooting time when the short-time recording and power-on/off are performed repeatedly at room temperature has also been improved.
    • When the RF100-500mm F4.5-7.1 L IS USM is attached, image stabilization of 6.0 steps is now possible when used in conjunction with the optical image stabilization mechanism of a compatible lens.
    • When the RF100-500mm F4.5-7.1 L IS USM is attached, the IS performance during continuous shooting may deteriorate with firmware Version 1.1.0. This phenomenon has been corrected.
    • Improved the image stabilization when shooting movies using some RF lenses.
    • When the display language “English” is set: The information display on the “Slow Synchro” setting screen has been corrected.
    • Improved the connectivity during FTP transfer.
    • Corrected the phenomenon that the movie recording time is not displayed correctly if “Date/Time/Area” is not set.


    Alle Änderungen für die R5
    • When the RF100-500mm F4.5-7.1 L IS USM is attached, image stabilization of 6.0 steps is now possible when used in conjunction with the optical image stabilization mechanism of a compatible lens.
    • When the RF100-500mm F4.5-7.1 L IS USM is attached, the IS performance during continuous shooting may deteriorate with firmware Version 1.1.0. This phenomenon has been corrected.


    Quelle: https://www.newsshooter.com/2020/09/...mware-updates/
  • penums
    Free-Member
    • 31.08.2016
    • 242

    #2
    AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

    Nun auch hier:

    Kommentar

    • JensLPZ
      Free-Member
      • 25.11.2015
      • 6357

      #3
      AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

      Danke Euch beiden, das Problem des RF 100-500 bei Serienbildern ist nun tatsächlich behoben, habs gerade mal ausprobiert.

      Kommentar

      • ehemaliger Benutzer

        #4
        AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

        Ich mußte gerade heftig schmunzeln. Früher (in analogen Zeiten) gab es defokussierte, dezentrierte und de* was noch alles Linsen. Heute gibts nur noch Computerprobleme. Ne neue Firmware und zack: alles im grünen Bereich.

        Fehlt nur noch ein Firmware Update gegen Glaspilz

        Kommentar

        • DB-Fotografie
          Free-Member
          • 15.03.2009
          • 1616

          #5
          AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

          Und, hängt sich die Kamera immernoch sporadisch auf?

          Kommentar

          • JensLPZ
            Free-Member
            • 25.11.2015
            • 6357

            #6
            AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

            Zitat von DB-Fotografie Beitrag anzeigen
            Und, hängt sich die Kamera immernoch sporadisch auf?
            ...machte sie bei mir noch nie, Daniel.

            Kommentar

            • endsommer
              Free-Member
              • 15.02.2011
              • 108

              #7
              AW: EOS R5/R6 Firmware Update 1.1.1 vom 09.09.2020

              Früher hattest auch ein Film dahinter, der keinerlei Korrekturen durchführen konnte in Abhängigkeit des Objektives - da passiert inzwischen eben viel schon in der Kamera und teils auch bevor das RAW geschrieben ist. Gerade bei DSLM ist das ja noch extremer - ohne Rechenknecht könntest nicht mal ein Bild im Sucher sehen :-)

              Kommentar

              Lädt...
              X